Global Mortgage Calculator

How our calculators work

This page explains, in plain language, exactly how the calculators on Global Mortgage Loan Calculator turn your inputs into numbers: the formulas they use, where the pre-filled figures come from, how our content is produced, and where the limits of these estimates lie. We publish it because a calculator you cannot inspect is a calculator you should not trust. If anything here does not match what a tool shows you, tell us via the Contact page and we will check it.

The monthly payment formula

Every payment calculator on the site is built on the standard amortization formula used across the mortgage industry: M = P × r(1 + r)ⁿ ÷ ((1 + r)ⁿ − 1), where M is the monthly principal-and-interest payment, P is the loan amount, r is the monthly interest rate (the annual rate divided by 12), and n is the total number of monthly payments (the term in years multiplied by 12). At a 0% rate, the payment is simply the loan amount divided by the number of months.

Worked example: on a $400,000 loan at 7.11% over 30 years, r = 0.005925 and n = 360, giving a principal-and-interest payment of $2,690.83 a month and total interest of about $568,697 over the full term if you never pay extra. Change any input and the same formula re-runs instantly — there are no hidden adjustments or lender fees inside the payment itself, and totals are displayed rounded to the nearest dollar.

Amortization schedules

The amortization schedule is produced by simulating the loan month by month rather than by a shortcut. Each month, interest is charged on the remaining balance (balance × monthly rate), the rest of the payment reduces the principal, and the balance falls; the monthly rows are then grouped into the yearly view. When you add an extra monthly payment, the simulation runs twice — with and without the extra amount — so the interest saved and months cut are the true difference between the two schedules, not an approximation.

What the total monthly payment includes

Where a calculator shows a total monthly payment, it is the principal and interest above, plus one-twelfth of the annual property tax, plus one-twelfth of the annual homeowners insurance premium, plus any monthly HOA or condo fee you enter. Spreading tax and insurance evenly across the year matches how most lenders collect them through escrow. Private mortgage insurance (PMI), where it applies, is estimated by the dedicated PMI calculator described below rather than folded silently into the main tool.

How PMI is estimated

The PMI calculator starts from your loan-to-value ratio (LTV): the loan amount divided by the home price. At an LTV of 80% or less, no PMI is required. Above 80%, the annual PMI rate comes from a fixed tier table based on LTV:

  • LTV above 80% up to 85%: 0.30% of the loan amount per year
  • LTV above 85% up to 90%: 0.45% per year
  • LTV above 90% up to 95%: 0.65% per year
  • LTV above 95%: 0.85% per year

The annual amount is divided by 12 for the monthly figure — so a $360,000 loan at 90% LTV uses the 0.65% tier, which is $195 a month. The tool then walks the amortization schedule to find when the balance reaches 80% of the original price (the point at which you can generally request cancellation) and 78% (where automatic termination generally applies). This is deliberately a simplified model: real PMI pricing also depends on your credit score, the insurer and the loan program, so treat the output as a planning estimate, not a quote.

Refinance break-even

The refinance calculator computes your current monthly payment and the new loan’s payment on the same balance, using the formula above. The monthly saving is the difference between the two. Break-even is then simple division: your estimated closing costs divided by the monthly saving, rounded up to whole months — $4,500 of closing costs against a $150 monthly saving breaks even in 30 months. The lifetime comparison adds up all payments over each loan’s full term and includes the closing costs on the new loan’s side. The tool does not roll closing costs into the new loan balance; if your lender does, your break-even point will be later than the one shown.

Inputs, defaults and state data

Every figure in every calculator can be changed, and the defaults are only starting points. The homepage calculator opens with a $500,000 home price, 20% down and a 30-year term. Its default interest rate is the latest weekly average for a 30-year fixed-rate mortgage from Freddie Mac’s Primary Mortgage Market Survey (PMMS) — the industry’s benchmark survey — and it is refreshed as new survey results are published each week. The homepage tool’s default property tax ($3,600 a year) and insurance ($1,200 a year) are round placeholder figures; your own tax bill and premium will differ, which is exactly why the fields are editable.

The 50 state calculator pages go further: each opens pre-loaded with that state’s figures from named public sources — median home prices from Zillow’s ZHVI index, effective property tax rates from the Tax Foundation’s analysis of U.S. Census Bureau (ACS) data, average homeowners insurance premiums from National Association of Insurance Commissioners (NAIC) data published by the Insurance Information Institute, and conforming loan limits from the Federal Housing Finance Agency (FHFA). Each state page lists its sources and data dates in its facts table, and its worked example is calculated at the current PMMS rate so you can follow the arithmetic. These are state-level averages: they describe a typical home in the state, not your property.

Our editorial policy

Guides and articles on this site are written from primary sources wherever a figure matters — Freddie Mac for rates, the FHFA for loan limits, the Consumer Financial Protection Bureau (CFPB) and official program rules for how loans and PMI work — and every page is reviewed by our editorial team before it is published. Pages carry a “last reviewed” date, and when the underlying figures change, the content changes with them: the default rate moves with the weekly PMMS release, loan limits are updated when the FHFA announces new ones, and the tax and insurance datasets behind the state pages are refreshed as their publishers release new editions. If you spot a figure that looks wrong, contact us — corrections are checked against the source and fixed.

Limitations — please read

Everything on this site is an estimate produced for education. We are not a bank, lender or broker, and nothing here is financial advice or an offer of credit. The models simplify reality in ways you should know about:

  • Interest is compounded monthly, the standard convention for U.S. mortgages; a loan that compounds differently will differ slightly.
  • Property tax and insurance are spread evenly over 12 months and held flat; real bills change over time.
  • The PMI tier table does not use your credit score, so your actual premium may be higher or lower.
  • The calculators do not include lender fees, escrow shortages or the difference between a note rate and an APR.

Your lender’s Loan Estimate and Closing Disclosure are the authoritative figures for any real loan — use our numbers to understand and question them, not to replace them.

Frequently Asked Questions

Which formula do your calculators use?

The standard amortization formula: M = P × r(1 + r)ⁿ ÷ ((1 + r)ⁿ − 1), where P is the loan amount, r is the annual interest rate divided by 12, and n is the term in months. The amortization schedule is then simulated month by month, so extra payments, payoff dates and interest totals are exact within the model.

Where does the default interest rate come from?

It is the latest weekly average for a 30-year fixed-rate mortgage from Freddie Mac's Primary Mortgage Market Survey (PMMS), refreshed as new survey results are published. It is a national benchmark to start from, not a quote: your lender's rate will depend on your credit profile, down payment and loan type.

How accurate is the PMI estimate?

The PMI calculator applies a fixed annual rate table based on your loan-to-value ratio — 0.30% to 0.85% of the loan amount per year. Real PMI premiums also depend on your credit score, the insurer and the loan program, so use the result for planning and compare it with the figure on your lender's Loan Estimate.

How does the refinance break-even calculation work?

It divides your estimated closing costs by the monthly payment saving and rounds up to whole months — that is the month from which the refinance starts paying for itself. The tool does not add closing costs to the new loan balance; if your lender rolls them in, your real break-even point will be later.

Are the tax and insurance figures on the state pages my actual bills?

No. They are state-level averages — property tax rates from the Tax Foundation and insurance premiums from NAIC data — provided so each state calculator opens with realistic figures for that state. Your county's tax bill and your own insurance premium will differ, so replace them with your real numbers for a personal estimate.

Is this site financial advice?

No. Global Mortgage Loan Calculator is an educational tool run by an independent team. We are not a bank, lender, broker or financial adviser, and we do not sell mortgages. For a decision about a real loan, rely on your lender's official Loan Estimate and Closing Disclosure and, where needed, a licensed adviser.

Related calculators & guides